Legal Size Manual Double wire binding machine CW360E
|Categories||Electric wire binding machine|
|Album||View larger image|
|Max Punching width||36cm (14|
|Max Punching thickness||35sheets|
|Max binding thickness||38cm|
|Terms of Payment||T/T|
Legal Size Manual Double wire binding machine CW360
A4(11")work width. Full 34disengageable punch dies with hard steel for clean punch hole 4 position depth side margin can be adjustable A sticker on the machine guide you to select the correct wire dimeter Manual Punch & Binding Machine with two seperated handle 3:1 Wire Binding Machine, 3:1 wire punching and 3:1&2:1 wire binding. The paper load is horizontal and has a margin guide to assist the user with the work being done. Maximum binding capacityup to 143 sheets with 3:1 wire,punch up to 32 sheets,
Electric Punching up to 30 sheets 70g paper each time
Punching A4 format,11'' size paper.
Binding documents up to 318 sheets.
Use all sizes ring from 4.8-14.8 mm
Side margin is adjustable.
Max. bind up 143 sheets
Punch up to 2.5--4mm
Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free High capacity waste container requires emptying less frequently
Disengagement Punch pins
Number of punch pins
Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.
All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.
Measure the thickness of the document and select the appropriate apron specification according to the letter
Select the correct comb diameter using the document measure
Select the correct back margin depth for the number of sheets
Select the correct punch profile for the sheet size. Select releasable dies as appropiate
Adjust the wire size adjustable knob in terms of the size of the wire
Punch sheets in small batches that do not overload the machine of the use
(Max 35 sheets)
The machine punching when pressure foot switch
When all punched sheets are loaded on to the wire, press the wire clamp again and take them out
Put the sheets on to the binding slot and push the binding handle forward to close the wire
We do a lot of testing before final package to pursue "100% quality" goal!
Jingda Road ,Shanlian Development Zone , , Hangzhou , ZheJiang