Home > Products > Binding Machine > Comb Binding Systems > Manual comb binding machine >

FC Size Manual Heavy Duty Comb Binding Machine

FC Size Manual Heavy Duty Comb Binding Machine

FC Size  Manual Heavy Duty Comb Binding Machine
FC Size  Manual Heavy Duty Comb Binding MachineFC Size  Manual Heavy Duty Comb Binding MachineFC Size  Manual Heavy Duty Comb Binding MachineFC Size  Manual Heavy Duty Comb Binding Machine
CategoriesManual comb binding machine
AlbumView larger image
BrandSUPU
ModelCB330
Max punching width :330mm
Max punching thickness:32sheets
Max binding thickness:500mm
FOB portShanghai/Ningbo
Terms of PaymentL/C, D/A, D/P, Western Union
Update Time2018-10-20
Detail Information

Steel binding machine CB330

This machine can bind for FC size paper ,easy to operate, use all size of binding comb rings. This are 23 adjustable punch pins about this machine,if you don't want to punch one hole,you just pull it out,so easy. This is back margin adjustment.You select the suitable back margin according to your punched paper.

  • Manual Punching up to 32 sheets 70g paper each time

  • Punching A4 format,11'' size paper.

  • Binding documents up to 500 sheets.

  • Use all sizes of plastic comb from 6mm to 50mm.

  • Side margin is adjustable.

Maximum:

  • Max. bind up 500 sheets 

  • Width 330mm

  • Punch up to 2.5--4mm

Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free High capacity waste container requires emptying less frequently


Model Name

CB330

Punch Width

330mm

Punching Thickness

30sheets

Punch Width

14.25mm

Disengagement Punch pins

23

Number of punch pins

23

Binding Thickness

500sheets

Motor

No

Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.

All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.


PRODUCT DETAIL


  • Measure the thickness of the document and select the appropriate apron specification according to the letter

  • Select the correct comb diameter using the document measure


  • Select the correct back margin depth for the number of sheets


  • Select the correct punch profile for the sheet size. Select releasable dies as appropiate 


  • Punch sheets in small batches that do not overload the machine of the use
    (Max 23 sheets)


  • The machine punching when use handle


  • Punch front and back covers first


  • Load punched sheets directly onto the opened comb, Starting with the front of the document.


  • Push the comb lever backwards to close the comb and remover the bound document.


We do a lot of testing before final package to pursue "100% quality" goal!

ADDRESS:

Jingda Road ,Shanlian Development Zone , , Hangzhou , ZheJiang

PHONE:

+86-571-88963565
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Name
Tel
*Title
*Content

Agree to use terms of service