Home > Products > Binding Machine > Wire Binding Systems > Manual wire binding machine >

A4 Size Manual Double wire binding machine CW360

A4 Size Manual Double wire binding machine CW360

A4 Size Manual  Double wire binding machine CW360
A4 Size Manual  Double wire binding machine CW360A4 Size Manual  Double wire binding machine CW360A4 Size Manual  Double wire binding machine CW360
CategoriesManual wire binding machine
AlbumView larger image
BrandSUPU
ModelCW360
Max Punching width33cm (A4)
Max Punching thickness32sheets
Max binding thickness38cm
FOB portNingbo/Shanghai
Terms of PaymentT/T
Update Time2018-11-18
Detail Information

A4 Size  Manual  Double wire binding machine CW360

A4(11")work width. Full 34disengageable punch dies with hard steel for clean punch hole. 4 positiondepth side margin can be adjustable. A sticker on the machine guide you to select the correct wire dimeter. Manual Punch & BindingMachine with two seperated handle. 3:1 Wire Binding Machine ,3:1 wire punching and 3:1&2:1 wire binding. The paper load is horizontal and has a margin guide to assist the user with the work being done. Maximum binding capacityup to 143 sheets with 3:1 wire,punch up to 32 sheets, 

  • Electric Punching up to 35 sheets 70g paper each time

  • Punching A4 format,11'' size paper.

  • Binding documents up to 143 sheets.

  • Use all sizes ring from 4.8-14.8 mm.

  • Side margin is adjustable.

Maximum:

  • Max. bind up 143 sheets 

  • Width 360mm

  • Punch up to 2.5--4mm

Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free High capacity waste container requires emptying less frequently


Model Name

CW360

Punch Width

360mm

Punching Thickness

35sheets

Punch Width

8.47mm

Disengagement Punch pins

42

Number of punch pins

42

Binding Thickness

143sheets

Motor

NO

Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.

All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.


PRODUCT DETAIL


  • Measure the thickness of the document and select the appropriate apron specification according to the letter

  • Select the correct comb diameter using the document measure


  • Select the correct back margin depth for the number of sheets


  • Select the correct punch profile for the sheet size. Select releasable dies as appropiate 


  • Adjust the wire size adjustable knob in terms of the size of the wire


  • Punch sheets in small batches that do not overload the machine of the use
    (Max 35 sheets)


  • The machine punching when use handle


  • When all punched sheets are loaded on to the wire, press the wire clamp again and take them out


  • Put the sheets on to the binding slot and push the binding handle forward to close the wire


We do a lot of testing before final package to pursue "100% quality" goal!

ADDRESS:

Jingda Road ,Shanlian Development Zone , , Hangzhou , ZheJiang

PHONE:

+86-571-88963565
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Name
Tel
*Title
*Content

Agree to use terms of service