Manual Wire Binding Machine SUPER23 plus
|Categories||Manual wire binding machine|
|Album||View larger image|
|Max binding capacity||318sheets|
|Max punch capacity||28sheets|
|Max punching length||300mm|
|Max binding length||300mm|
|Number of Punch Pins||23|
|Disengageable Die Pins||23|
|Unit Price||US $ 200 / piece|
|Terms of Payment||L/C, T/T, Western Union, MoneyGram|
28 Punch Sheets Manual Wire Closing Machine SUPER23 plus
Full 23 disengagement punch pins can punch wide range size paper,Eg. A4,A3,B5,US letter and smaller size. Select paper stop assistant to ensure the sheet aligning. Document measurement guide you to select right wire size. Smart Wire Selector make it easy choose the correct wire diameter for your document. Special hardened punches assure a clean and precise punch time after time, even when punching hard to punch materials, such as Polyester, PP, PVC
Electric Punching up to 28 sheets 70g paper each time
Punching A4 format,11'' size paper.
Binding documents up to 318 sheets.
Use all sizes of plastic comb from 4.8—14.8.
Side margin is adjustable.
Max. bind up 143 sheets
Punch up to 2--3mm
Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free High capacity waste container requires emptying less frequently
Disengagement Punch pins
Number of punch pins
Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.
All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.
Measure the thickness of the document and select the appropriate apron specification according to the letter
Select the correct comb diameter using the document measure
Select the correct back margin depth for the number of sheets
Select the correct punch profile for the sheet size. Select releasable dies as appropiate
Adjust the wire size adjustable knob in terms of the size of the wire
Punch sheets in small batches that do not overload the machine of the use
(Max 28 sheets)
The machine punching when use handle
When all punched sheets are loaded on to the wire, press the wire clamp again and take them out
Put the sheets on to the binding slot and push the binding handle forward to close the wire
We do a lot of testing before final package to pursue "100% quality" goal!
Jingda Road ,Shanlian Development Zone , , Hangzhou , ZheJiang