Home / All / Binding Machine / Wire Binding Systems / Manual wire binding machine /

3:1 pitch Manual Wire Binding Machine SUPER34 plus

3:1 pitch Manual Wire Binding Machine SUPER34 plus

3:1  pitch  Manual Wire Binding Machine SUPER34 plus
3:1  pitch  Manual Wire Binding Machine SUPER34 plus3:1  pitch  Manual Wire Binding Machine SUPER34 plus3:1  pitch  Manual Wire Binding Machine SUPER34 plus
CategoriesManual wire binding machine
BrandSUPU
ModelSUPER34 plus
OriginZHEJIANG,CHINA
Max binding capacity318sheets
Max punch capacity28sheets
Max punching length300mm
Max binding length300mm
Number of Punch Pins34
Disengageable Die Pins34
Punching MethodManual
Binding MethodManual
Unit PriceUS $ 200 / piece
FOB portNingbo/Shanghai
Terms of PaymentL/C, T/T, Western Union, MoneyGram
Update TimeDec 14,2024
Detail Information

3:1  pitch  Manual Wire Binding Machine SUPER34 plus  

Full 34 disengagement punch pins can punch wide range size paper,Eg. A4,A3,B5,US letter and smaller size. Select paper stop assistant to ensure the sheet aligning. Document measurement guide you to select right wire size. Smart Wire Selector make it easy choose the correct wire diameter for your document. Special hardened punches assure a clean and precise punch time after time, even when punching hard to punch materials, such as Polyester, PP, PVC 

  • Manual  Punching up to 28 sheets 70g paper each time

  • Punching A4 format,11'' size paper.

  • Binding documents up to 318 sheets.

  • Use all sizes of plastic comb from 4.8—14.8.

  • Side margin is adjustable.

Maximum:

  • Max. bind up 143 sheets 

  • Width 300mm

  • Punch up to 2--3mm

Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free High capacity waste container requires emptying less frequently



Model Name

SUPER34 plus

Punch Width

300mm

Punching Thickness

28sheets

Punch Width

8.47 mm

Disengagement Punch pins

34

Number of punch pins

34

Binding Thickness

318sheets

Motor

No

Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.

All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.



PRODUCT DETAIL


  • Measure the thickness of the document and select the appropriate apron specification according to the letter

  • Select the correct comb diameter using the document measure


  • Select the correct back margin depth for the number of sheets


  • Select the correct punch profile for the sheet size. Select releasable dies as appropiate 


  • Adjust the wire size adjustable knob in terms of the size of the wire


  • Punch sheets in small batches that do not overload the machine of the use
    (Max 28 sheets)


  • The machine punching when use handle


  • When all punched sheets are loaded on to the wire, press the wire clamp again and take them out


  • Put the sheets on to the binding slot and push the binding handle forward to close the wire


We do a lot of testing before final package to pursue "100% quality" goal!

Address:

Tangpu Industrial Park, Anji, Huzhou City, Zhejiang Province, 313300. CHINA

PHONE:

+86-571-88963565
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.