Home / All / Binding Machine / Wire Binding Systems / Manual wire binding machine /

A3 Size Manual Double wire binding machine CW430

A3 Size Manual Double wire binding machine CW430

A3 Size Manual Double wire binding machine CW430
A3 Size Manual Double wire binding machine CW430A3 Size Manual Double wire binding machine CW430A3 Size Manual Double wire binding machine CW430A3 Size Manual Double wire binding machine CW430A3 Size Manual Double wire binding machine CW430
CategoriesManual wire binding machine
BrandSUPU
ModelCW430
Max Punching width43cm (A3 Size )
Max Punching thickness25sheets
Max binding thickness38cm
FOB portNingbo/Shanghai
Terms of PaymentT/T
Update TimeMar 19,2024
Detail Information

A3 Size  Manual Double wire binding machine CW430

A3 Size work width accept larger than A4 size paper, such as 14",legal size sheet and A3 Size sheet. Full 50 disengageable punch dies with hard steel for clean punch hole. 4 positiondepth side margin can be adjustable. A sticker on the machine guide you to select the correct wire dimeter. Manual Punch & BindingMachine with two seperated handle. 3:1 Wire Binding Machine ,3:1 wire punching and 3:1&2:1 wire binding. The paper load is horizontal and has a margin guide to assist the user with the work being done. Maximum binding capacityup to 143 sheets with 3:1 wire,punch up to 25 sheets

  • Manual Punching up to 25 sheets 70g paper each time

  • Punching A4 A3  size paper.

  • Binding documents up to 143 sheets.

  • Use all sizes ring from 4.8-14.8 mm.

  • Side margin is adjustable.

Maximum:

  • Max. bind up 143 sheets 

  • Width 430mm

  • Punch up to 2.5--4mm

Document measure to determine which comb size to be used All aluminium construction make it durable and many years worry free High capacity waste container requires emptying less frequently


Model Name

CW430

Punch Width

430mm

Punching Thickness

25sheets

Punch Width

8.47mm

Disengagement Punch pins

50

Number of punch pins

50

Binding Thickness

143sheets

Motor

No

Technical modifications may be made without notice. 1 mm = 10 sheets of paper, based on 80 gsm.

All performance outputs are based on 80 gsm paper and may vary depending on the product type, the working environment and the operator. For best punching results we recommend a paper thickness of 2.0 - 2.5 mm.


PRODUCT DETAIL


  • Measure the thickness of the document and select the appropriate apron specification according to the letter

  • Select the correct comb diameter using the document measure


  • Select the correct back margin depth for the number of sheets


  • Select the correct punch profile for the sheet size. Select releasable dies as appropiate 


  • Adjust the wire size adjustable knob in terms of the size of the wire


  • Punch sheets in small batches that do not overload the machine of the use
    (Max 25 sheets)


  • The machine punching when use handle


  • When all punched sheets are loaded on to the wire, press the wire clamp again and take them out


  • Put the sheets on to the binding slot and push the binding handle forward to close the wire


We do a lot of testing before final package to pursue "100% quality" goal!

Address:

Tangpu Industrial Park, Anji, Huzhou City, Zhejiang Province, 313300. CHINA

PHONE:

+86-571-88963565
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.